{"id":188,"date":"2026-09-26T05:11:04","date_gmt":"2026-09-26T05:11:04","guid":{"rendered":"https:\/\/www.fieldpulse.com\/articles\/appliance-repair-business-management-software\/"},"modified":"2026-10-02T05:28:53","modified_gmt":"2026-10-02T05:28:53","slug":"appliance-repair-business-management-software","status":"publish","type":"post","link":"https:\/\/www.fieldpulse.com\/articles\/appliance-repair-business-management-software\/","title":{"rendered":"Best Appliance Repair Business Management Software"},"content":{"rendered":"<h2>Key Takeaways<\/h2>\n<ul>\n<li>\n<p>Appliance repair depends on multi-visit jobs. The diagnostic visit and repair visit are usually separate, so information must survive between truck rolls.<\/p>\n<\/li>\n<li>\n<p>Effective appliance repair software tracks one job record through six core stages: Diagnostic Scheduled, Diagnostic Complete, Awaiting Parts, Parts Received, Return Scheduled, and Completed. It does this without re-entering model numbers, serial numbers, or diagnoses.<\/p>\n<\/li>\n<li>\n<p>Serialized inventory tracking by model and serial number prevents ordering the wrong revision of parts. This reduces costly second truck rolls that happen when you only track quantities.<\/p>\n<\/li>\n<li>\n<p>Warranty work needs pre-authorization, complete documentation attached to the job record, and claim filing from that same record. This keeps valid claims from being denied on technicalities.<\/p>\n<\/li>\n<li>\n<p>FieldPulse is built for appliance repair teams that need a workflow-first platform for multi-visit jobs, serialized inventory, warranty documentation, and two-way QuickBooks sync. <a target=\"_blank\" rel=\"noopener noreferrer nofollow\" href=\"https:\/\/www.fieldpulse.com\/book-demo?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\"><strong>See how it connects your office and field teams on one job record<\/strong><\/a>.<\/p>\n<\/li>\n<\/ul>\n<h2>Why Appliance Repair Workflows Differ From HVAC And Plumbing<\/h2>\n<p>HVAC, plumbing, and garage door repair service are mostly single-visit trades. A tech arrives, diagnoses, repairs, invoices, and leaves. The job record can stay simple because the job is simple.<\/p>\n<p>Appliance repair follows a different pattern. The diagnostic visit and the repair visit are almost never the same visit. The tech reads the model number off the data plate, identifies the fault, and leaves, because the part has to be ordered against that specific model and serial before anything can be fixed. That gap between visit one and visit two is where information must survive. The model number, the serial number, the error code, the diagnosis, the part on order, and the return visit all need to stay tied together.<\/p>\n<p>Generic field service software focuses on customers and work orders and suits high-volume, low-complexity service work. It dispatches a technician, tracks time, generates an invoice, and closes the ticket. That pattern usually matches a single-visit job. The gaps show up on the second truck roll. The model number lives in a text thread. The return visit was never linked to the original job. The warranty paperwork never got attached. The office rebuilds the job from memory. The part does not fit because the wrong revision was ordered. The warranty claim gets filed late and denied. These issues are structural problems that grow with your team, not effort problems.<\/p>\n<h2>How To Track A Multi-Visit Appliance Repair Job<\/h2>\n<p>A multi-visit appliance repair job has six core stages: Diagnostic Scheduled, Diagnostic Complete, Awaiting Parts, Parts Received, Return Scheduled, and Completed, with a separate \u201cClosed\u201d status sometimes listed as a seventh. At each stage, a specific action happens and a specific role owns it. Here is how that looks when the job record carries the information instead of your team trying to remember it.<\/p>\n<figure style=\"text-align: center\"><img decoding=\"async\" src=\"https:\/\/cdn.aigrowthmarketer.co\/1785864921628-700481889b2a.webp\" alt=\"A FieldPulse job record for a new system installation with details and a location map.\" style=\"max-height: 500px\" loading=\"lazy\"><figcaption><em>Every job in one record \u2014 customer, location, line items, notes, photos, and status \u2014 so nothing falls through the cracks from the first call to the final invoice.<\/em><\/figcaption><\/figure>\n<ol>\n<li>\n<p><strong>Intake and Scheduling (Office).<\/strong> The office creates a job record with the customer\u2019s name, address, appliance type, reported symptom, and preferred time. Good appliance repair scheduling software also captures the appliance brand, model, and serial number at booking if the customer has them. The sticker is typically inside the door frame, behind the kick plate, or on the back panel. The job record is created once and stays open through every visit.<\/p>\n<\/li>\n<li>\n<p><strong>Diagnostic Visit (Tech).<\/strong> The tech arrives and records brand, model number, serial number, error code, diagnosis, and photos directly on the job record from the mobile app. At this point the job record becomes the system of truth. If the model number lives in a text thread instead, every later step turns into guesswork.<\/p>\n<\/li>\n<li>\n<p><strong>Parts Order (Office Or Tech).<\/strong> The part is ordered against the model and serial number already on the job record. A purchase order links to the work order so the part, its cost, and its status stay visible to the office without a phone call. The job status moves to \u201cparts ordered.\u201d<\/p>\n<\/li>\n<li>\n<p><strong>Return Visit Scheduling (Office).<\/strong> When the part arrives, the office schedules the return visit and links it to the original job record, not as a new job. This handoff is where many generic tools break. A new job loses the diagnosis, the part history, and the warranty status. The original job record needs to carry all of it.<\/p>\n<\/li>\n<li>\n<p><strong>Invoice (Tech Or Office).<\/strong> The invoice is built from the parts and labor already captured on the job record. No one re-enters line items. The tech can invoice and collect payment on site, or the office can generate it from the completed job. Either way, the line items are already there.<\/p>\n<\/li>\n<li>\n<p><strong>Warranty Claim (Office).<\/strong> If the job is warranty work, the claim paperwork attaches to the same job record. That includes the authorization number, parts and labor detail, photos, and the customer\u2019s signature. The claim is filed from that record instead of being reconstructed from an access files folder weeks later.<\/p>\n<\/li>\n<\/ol>\n<p>The breakdown at each handoff is predictable. The model number lives in a text thread. The return visit never gets scheduled. The warranty claim gets filed late and denied. These failures happen because the information does not carry forward automatically. The fix is a job record that carries the information so your team does not have to, not more discipline.<\/p>\n<p><a target=\"_blank\" rel=\"noopener noreferrer nofollow\" href=\"https:\/\/www.fieldpulse.com\/book-demo?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\"><strong>Walk your own multi-visit job through a FieldPulse demo<\/strong><\/a> before you sign anything.<\/p>\n<h2>How To Manage Appliance Parts And Serial Numbers In Your Software<\/h2>\n<p>Serialized inventory tracks parts and equipment by model and serial number instead of only by name and quantity. For an appliance shop, this matters because two control boards can look identical and list for the same price while serving different revisions of the same model year. Ordering the wrong revision turns into a second truck roll that should never happen.<\/p>\n<p>Your appliance repair inventory software needs to handle three jobs that generic quantity tracking cannot.<\/p>\n<ul>\n<li>\n<p><strong>Link Parts To The Work Order.<\/strong> When a tech adds a part to a job, the van stock count drops and the part appears on that job\u2019s invoice in one action. A part consumed on a job should never require anyone to re-enter it.<\/p>\n<\/li>\n<li>\n<p><strong>Track Stock By Location.<\/strong> Company-wide totals do not help dispatch. Knowing \u201cwe have three pumps\u201d does not help if the pump sits on a van 40 minutes away in the wrong direction. Per-van inventory treats each truck and the shop as its own location with its own live count.<\/p>\n<\/li>\n<li>\n<p><strong>Alert On Low Stock And Generate Purchase Orders.<\/strong> Reorder alerts trigger when a part drops below its threshold per location. The purchase order is generated from that list. Receiving the shipment against the PO catches short shipments and wrong revisions before they turn into second trips.<\/p>\n<\/li>\n<\/ul>\n<p>Asset and equipment records with serial numbers and installation history let a tech arriving at a repeat address see what equipment is there and what has been done to it before knocking on the door. Barcode scanning closes the loop in the field. When a tech scans a part as it is added to a work order, the parts catalog, stock count, and customer\u2019s record all update in a single motion.<\/p>\n<figure style=\"text-align: center\"><img decoding=\"async\" src=\"https:\/\/cdn.aigrowthmarketer.co\/1785864960033-039549b8cf6b.webp\" alt=\"The FieldPulse mobile app open on a smartphone showing a technician&apos;s daily dashboard.\" style=\"max-height: 500px\" loading=\"lazy\"><figcaption><em>Your whole operation in your techs&#8217; pockets. The FieldPulse mobile app puts schedules, job details, estimates, and customer history on any phone \u2014 online or off.<\/em><\/figcaption><\/figure>\n<p>When you demo any platform, ask the vendor to show a part ordered against a model and serial number and then consumed on the return visit. That single scenario tells you more than any feature list.<\/p>\n<h2>Warranty Dispatch And Claim Paperwork<\/h2>\n<p>Warranty work differs from customer-pay work in one critical way: the payer is not the customer. The manufacturer or third-party administrator pays, and they have strict documentation rules and no incentive to chase you for an invoice.<\/p>\n<p>Pre-authorization is the most common reason an extended-contract appliance warranty claim gets denied outright. The work was fine, but the sequence was wrong. If a job will be billed to an administrator, the authorization step belongs before the repair, and your office needs to know it is a warranty job when it assigns it.<\/p>\n<p>The documentation a warranty claim requires includes the model and serial of the unit, the authorization or claim number, the failed part and replacement part by part number, labor performed and time on site, date of service and technician, the customer\u2019s signature, and photos where the failure is visible. When service history, model numbers, serial numbers, parts, labor details, and invoices are stored in separate places, warranty jobs become difficult to manage.<\/p>\n<p>The fix is attaching all of it to the job record. You avoid scattering it across a folder, a photo album, or a separate system. When the claim is filed weeks after the repair, the authorization number, photos, customer signature, and parts detail all live on the same record the tech used on the day of service. That is what keeps a legitimate claim from being denied on a technicality. But warranty work is only one part of the office workload. The other major drain is duplicate data entry between your field service software and your accounting system.<\/p>\n<h2>QuickBooks Sync For Appliance Repair: The Office Administrator\u2019s View<\/h2>\n<p>If you run the office, this section speaks directly to your day-to-day work.<\/p>\n<p>The double-job tax in appliance terms looks like this. The tech records the model number, the parts, and the diagnosis in the field. Then you read the ticket and retype the parts and labor into an estimate or invoice. Then you re-enter the customer into the accounting system. The work is finished, but it is not <em>done<\/em> until you have re-created it in a second place. That second pass stays invisible on any job sheet and grows with volume instead of revenue.<\/p>\n<p>The fix is one customer and job record your whole team uses, plus a two-way QuickBooks Online sync. Here is what that sync covers.<\/p>\n<figure style=\"text-align: center\"><img decoding=\"async\" src=\"https:\/\/cdn.aigrowthmarketer.co\/1785864785608-660b04437eb2.webp\" alt=\"A team scheduling calendar in the FieldPulse app showing jobs assigned across technicians.\" style=\"max-height: 500px\" loading=\"lazy\"><figcaption><em>Drag-and-drop scheduling and dispatching keeps every tech&#8217;s day organized and every job assigned. See the whole team&#8217;s calendar at a glance and fill gaps before they cost you a service call.<\/em><\/figcaption><\/figure>\n<ul>\n<li>\n<p>Customers, line items, estimates, invoices, payments, purchase orders with full line-item detail, and vendors sync in both directions.<\/p>\n<\/li>\n<li>\n<p>Timesheets flow into QuickBooks Online when a tech clocks out.<\/p>\n<\/li>\n<li>\n<p>Tax rates come from QuickBooks Online, so what the customer is charged matches what the books expect.<\/p>\n<\/li>\n<li>\n<p>A correction made in QuickBooks Online carries back into the field service software instead of being overwritten.<\/p>\n<\/li>\n<li>\n<p>Works with QuickBooks Online Essentials, Plus, and Advanced in the US, Canada, and Australia.<\/p>\n<\/li>\n<\/ul>\n<p>That last point is the one worth testing. Ask every vendor you evaluate: <em>When your admin corrects something in QuickBooks Online, how does that fix get back into your field service software?<\/em> If the answer is unclear, you will be catching sync errors early instead of trying to untangle them once dozens of invoices are affected.<\/p>\n<p>Find out where your admin workload is heaviest with the three-minute <a target=\"_blank\" rel=\"noindex nofollow\" href=\"https:\/\/results.fieldpulse.com\/admin-workload\/?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\">Admin Workload Assessment<\/a>. Then <a target=\"_blank\" rel=\"noopener noreferrer nofollow\" href=\"https:\/\/www.fieldpulse.com\/book-demo?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\"><strong>book a demo and bring your office manager<\/strong><\/a>.<\/p>\n<h2>How The 50 Rule Guides Appliance Repair Decisions<\/h2>\n<p>The 50% rule is a common guideline for repair-versus-replace decisions. If a repair costs more than half the price of a comparable new appliance, replacement usually makes more sense.<\/p>\n<p>A more complete version, sometimes called the 50\/50 rule, adds an age test. Both conditions must be true before replacement wins. The appliance must have reached 50% of its expected lifespan and the repair cost must exceed 50% of the price of a comparable new unit, with lifespan averages drawn from the National Association of Home Builders. The rule is a starting point, not a verdict. But even the strongest rule of thumb will not help if your software cannot support the multi-visit workflow that appliance repair demands.<\/p>\n<h2>Best Software Choice For Growing Appliance Repair Teams<\/h2>\n<p>The strongest appliance repair software for an established team is built around the multi-visit job. The job record carries the model number, serial number, diagnosis, parts order, return visit, invoice, and warranty claim without anyone re-entering information between steps. For established, team-based residential service businesses of roughly 7 to 20 techs, FieldPulse is built to fit.<\/p>\n<p>Here is why, in workflow terms.<\/p>\n<ul>\n<li>\n<p><strong>ClearPath<\/strong> turns your process into office-defined job stages with required actions at each stage. Your diagnostic visit, parts order, and return visit stay on the same job record because the workflow is built to hold them there. ClearPath\u2019s Mobile Focus View shows a tech only what the current step needs. That means fewer taps, less to remember, and faster ramp-up for new hires.<\/p>\n<\/li>\n<li>\n<p><strong>One Job Record<\/strong> holds the model number, serial number, error code, diagnosis, photos, parts, and warranty status from the first visit through the final claim.<\/p>\n<\/li>\n<li>\n<p><strong>Inventory Management<\/strong> tracks parts and materials with barcode scanning, low-stock alerts, and serialized inventory. Asset and equipment records hold serial numbers and installation history so a tech arriving at a repeat address already knows what is there.<\/p>\n<\/li>\n<li>\n<p><a target=\"_blank\" rel=\"noindex nofollow\" href=\"https:\/\/www.fieldpulse.com\/features\/job-costing?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\"><strong>Job costing<\/strong><\/a> estimates your <a target=\"_blank\" rel=\"noindex nofollow\" href=\"https:\/\/www.fieldpulse.com\/resources\/blog\/flat-rate-software?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\">profit margin<\/a> before you dispatch and confirms actual profit after completion. You know which job types make money and which ones do not.<\/p>\n<\/li>\n<li>\n<p><strong>Two-Way QuickBooks Online Sync<\/strong> ends duplicate entry. Customers, line items, estimates, invoices, payments, purchase orders, and vendors sync both ways. A correction made in QuickBooks Online carries back into FieldPulse.<\/p>\n<\/li>\n<li>\n<p><strong>Offline Access<\/strong> caches the past week of jobs, projects, customers, estimates, and invoices on the device. A tech in a basement or a rural service area can complete a majority of the job without cell signal by adding notes, uploading photos, updating statuses, and clocking in and out. Everything syncs when signal returns. Offline payment collection, purchase order creation, and new customer or job record creation are not supported offline.<\/p>\n<\/li>\n<\/ul>\n<p>If your team has outgrown simpler software where inventory, permissions, multi-stage workflows, or job economics have become more than the platform can carry, FieldPulse is built for that transition. It gives growing teams an all-in-one <a target=\"_blank\" rel=\"noindex nofollow\" href=\"https:\/\/www.fieldpulse.com\/?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\">FSM software<\/a> option that fixes the structural cause of disconnected systems.<\/p>\n<p><a target=\"_blank\" rel=\"noopener noreferrer nofollow\" href=\"https:\/\/www.fieldpulse.com\/book-demo?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\"><strong>Schedule a walkthrough to see how FieldPulse connects your office and field on one workflow<\/strong><\/a>.<\/p>\n<h2>What To Ask In A Demo<\/h2>\n<p>Bring these questions into every sales call. The answers reveal more than any feature comparison.<\/p>\n<ol>\n<li>\n<p>Show me a part ordered against a model and serial number and then consumed on the return visit.<\/p>\n<\/li>\n<li>\n<p>Show me a return visit linked to the original job record, not created as a new job.<\/p>\n<\/li>\n<li>\n<p>Show me a warranty claim with its authorization number, photos, and paperwork attached to the job.<\/p>\n<\/li>\n<li>\n<p>Show me what happens to duplicate entry when your books and your field service software agree, especially when my admin corrects something in QuickBooks Online.<\/p>\n<\/li>\n<li>\n<p>Show me a complete tech workflow, including what happens when the signal drops.<\/p>\n<\/li>\n<\/ol>\n<h2>Conclusion: Choosing Appliance Repair Software That Matches Your Workflow<\/h2>\n<p>The evaluation framework for appliance repair software comes down to one core idea. Either the job record carries the information, or your people carry it. Document your current multi-visit workflow. Identify where the second truck roll breaks operationally. Gather input from your office administrator before signing anything. The platform that holds up under those three tests is the right one.<\/p>\n<p><a target=\"_blank\" rel=\"noopener noreferrer nofollow\" href=\"https:\/\/www.fieldpulse.com\/book-demo?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\"><strong>Book a FieldPulse demo and walk your own appliance repair workflow through the platform<\/strong><\/a>.<\/p>\n<h2>Frequently Asked Questions<\/h2>\n<p>These are the questions appliance repair business owners ask most often when they evaluate field service software.<\/p>\n<h3>What Features Should Appliance Repair Business Management Software Include?<\/h3>\n<p>The non-negotiable features for an appliance repair shop include a job record that persists across multiple visits, serialized inventory that tracks parts by model and serial number, warranty dispatch and claim documentation attached to the job, appliance and equipment records with installation history, and a two-way accounting sync that ends duplicate entry. Beyond those, look for office-defined job stages that keep diagnostic visits, parts orders, and return visits on the same record. Barcode scanning and per-van stock tracking, low-stock alerts and purchase orders linked to work orders, and mobile access that works in low-signal environments like basements and rural service areas also matter. Scheduling, dispatch, invoicing, and <a target=\"_blank\" rel=\"noindex nofollow\" href=\"https:\/\/www.fieldpulse.com\/features\/job-costing?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\">job costing<\/a> round out a complete platform. The real test is whether the platform can walk a part from a model-number search through a purchase order, a return visit, and a warranty claim without anyone retyping it.<\/p>\n<h3>How Do I Manage Warranty Work Differently From Customer-Pay Work In My Software?<\/h3>\n<p>Warranty work requires your software to handle three extra jobs. First, it needs to flag the job as warranty work at dispatch so your office knows to obtain pre-authorization before the tech starts. Skipping pre-authorization is the most common reason a legitimate warranty claim gets denied. Second, it needs to capture the full documentation set on the job record. That includes the authorization or claim number, the model and serial of the unit, the failed part and replacement part by part number, labor performed, date of service, technician, customer signature, and photos. Third, it needs to keep all of that attached to the job record so the claim can be filed from the same record the tech worked from, even if weeks pass between the repair and the filing. The payer on a warranty job is a manufacturer or third-party administrator with strict documentation rules. If your software stores that documentation in an access files folder, a photo album, or a separate system, you will lose claims on technicalities that have nothing to do with the quality of the repair.<\/p>\n<h3>What Is The Difference Between Serialized Inventory And Standard Parts Tracking For Appliance Repair?<\/h3>\n<p>Standard parts tracking counts quantities. You know you have 12 inlet valves in stock. Serialized inventory tracks individual units by serial number, so you know which specific valve went on which specific appliance, on which job, on which date, installed by which tech. For appliance repair, serialized tracking matters for two reasons. First, parts compatibility is model-specific. Two control boards can look identical and carry the same SKU while serving different revisions of the same model year. Ordering the wrong revision creates a second truck roll. Serialized tracking tied to the appliance\u2019s model and serial number prevents that. Second, warranty claims require part-level documentation, including the failed part number, the replacement part number, and the install date. Without serialized tracking, that documentation has to be reconstructed from memory or access files, which is where claims get denied. The practical test in a demo is simple. Ask the vendor to show a part ordered against a model and serial number, consumed on a return visit, and then traceable back to that specific job and appliance.<\/p>\n<h3>How Does A Two-Way QuickBooks Online Sync Actually End Duplicate Entry For An Appliance Repair Office?<\/h3>\n<p>Most field service software pushes data into QuickBooks Online in one direction. When your bookkeeper corrects something in QuickBooks, such as a customer name, a line item, or a tax rate, the correction can get overwritten the next time the field software syncs. Your office ends up maintaining two systems manually, which creates duplicate entry. As covered earlier, a true two-way sync means corrections made in QuickBooks Online carry back into the field service software, and corrections made in the field service software carry into QuickBooks Online. The key difference is that most software only pushes data one way. The diagnostic question to ask every vendor is clear. When your admin corrects something in QuickBooks Online, how does that fix get back into your field service software? If the answer is unclear, you will be managing two systems indefinitely.<\/p>\n<h3>How Long Does It Take To Implement Appliance Repair Business Management Software?<\/h3>\n<p>For an established team-based appliance repair shop, a realistic implementation window is two to six weeks. The exact timing depends on your team size, which capabilities you turn on, how much data needs to migrate, and how your accounting is set up. The sequence usually runs as a series of steps.<\/p>\n<ol>\n<li>\n<p>Scope the work.<\/p>\n<\/li>\n<li>\n<p>Get an implementation manager assigned.<\/p>\n<\/li>\n<li>\n<p>Configure the foundation, including job stages, templates, permissions, and the mobile workflow.<\/p>\n<\/li>\n<li>\n<p>Move your data and connect QuickBooks Online.<\/p>\n<\/li>\n<li>\n<p>Train each role through working sessions.<\/p>\n<\/li>\n<li>\n<p>Transition to ongoing support.<\/p>\n<\/li>\n<\/ol>\n<p>Your team will have tasks between sessions. That work is what makes the rollout stick instead of stall. Successful appliance repair software implementations phase the rollout rather than switching everything at once. For a 2\u20135 truck shop, week 1 sets up multi-visit jobs and scheduling, week 2 covers service categories, pricing, and warranty setup, and weeks 3\u20134 wire up the parts workflow and job status or SMS automations, with 1\u20132 extra weeks added per manufacturer warranty claim workflow. Anyone who promises implementation with no work is not being straight with you. The real question is whether the process is structured well enough that the work feels manageable.<\/p>\n<section data-read-next=\"true\">\n<h2>Read Next<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.fieldpulse.com\/articles\/appliance-repair-scheduling-dispatch\/?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\" target=\"_blank\">Appliance Repair Scheduling &amp; Dispatch Software<\/a><\/li>\n<li><a href=\"https:\/\/www.fieldpulse.com\/articles\/best-appliance-repair-costing-software\/?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\" target=\"_blank\">Job Costing Software for Appliance Repair Businesses<\/a><\/li>\n<li><a href=\"https:\/\/www.fieldpulse.com\/articles\/appliance-repair-job-profitability-software\/?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\" target=\"_blank\">Appliance Repair Job Profitability Software: A Guide<\/a><\/li>\n<li><a href=\"https:\/\/www.fieldpulse.com\/articles\/appliance-repair-software-pricing\/?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\" target=\"_blank\">Appliance Repair Software Pricing: What You Pay at Scale<\/a><\/li>\n<li><a href=\"https:\/\/www.fieldpulse.com\/articles\/best-field-service-software-plumbing\/?utm_source=ai-growht-agent&amp;utm_term=appliance-repair-business-management-software\" target=\"_blank\">Best Field Service Software for Plumbing Contractors<\/a><\/li>\n<\/ul>\n<\/section>\n","protected":false},"excerpt":{"rendered":"<p>FieldPulse helps appliance repair teams track multi-visit jobs, parts, and warranty claims. Try the all-in-one FSM built for your workflow.<\/p>\n","protected":false},"author":118,"featured_media":187,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"inline_featured_image":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-188","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized"],"_links":{"self":[{"href":"https:\/\/www.fieldpulse.com\/articles\/wp-json\/wp\/v2\/posts\/188","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fieldpulse.com\/articles\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fieldpulse.com\/articles\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fieldpulse.com\/articles\/wp-json\/wp\/v2\/comments?post=188"}],"version-history":[{"count":2,"href":"https:\/\/www.fieldpulse.com\/articles\/wp-json\/wp\/v2\/posts\/188\/revisions"}],"predecessor-version":[{"id":340,"href":"https:\/\/www.fieldpulse.com\/articles\/wp-json\/wp\/v2\/posts\/188\/revisions\/340"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fieldpulse.com\/articles\/wp-json\/wp\/v2\/media\/187"}],"wp:attachment":[{"href":"https:\/\/www.fieldpulse.com\/articles\/wp-json\/wp\/v2\/media?parent=188"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fieldpulse.com\/articles\/wp-json\/wp\/v2\/categories?post=188"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fieldpulse.com\/articles\/wp-json\/wp\/v2\/tags?post=188"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}